0 of 14 questions completed
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading…
You must sign in or sign up to start the quiz.
You have to pass the previous Module’s quiz in order to start this quiz:
you have successfully completed the quiz.
Delta connection – Y-shaped arrangement of three-phase windings.CorrectIncorrect
Star connection – Triangular arrangement of three-phase windings.CorrectIncorrect
Bridge – Connecting two or more points in a circuit.CorrectIncorrect
Overload – Device, connected in a circuit that trips the circuit when an excess
Motor windings are protected against abnormally high currents (overload) by
way of overload protection devices, normally in the starting circuit.CorrectIncorrect
Overload settings depend on how the overload protection devices are
connected, i.e. in line or in phase.CorrectIncorrect
Voltage measured between lines is the ______voltage (VL).CorrectIncorrect
Voltage measured across a phase is the _______voltage (Vp)CorrectIncorrect
Current flowing in a phase is the ______current (IP).CorrectIncorrect
Current flowing in a line is a ______current (IL)CorrectIncorrect
In a ______connected winding the phase current is the same as the line current.CorrectIncorrect
The ______voltage in a star connected winding is lower than the line voltage.CorrectIncorrect
In a delta connected winding the phase volts are equal to the ______volts.CorrectIncorrect
The _________current in a delta connected winding is equal to the line current divided by the square root of 3.CorrectIncorrect